Faculty details

Prof.Mohammed Hamid Siddique

Designation: Assistant Professor

Department: Petroleum Engineering

Email: mhsiddique[at]iitism[dot]ac[dot]in

Contact Number:

Office Number: +91-326-223-5430

Personal Page: Click Here

About Me: Friendly, Problem-Solving & Critical Thinking, Interdisciplinary Collaboration, interested in doing design optimization-based research, energy efficient equipment's design, Technology Adoption

Research Interest: Drilling Engineering, Well Integrity, Artificial Lift Design, Flow Assurance, AI/ML based Design Optimization, Thermal Energy Storage

Teaching

UG Courses

1. Drilling Technology

2. Drilling Fluids and Cements

3. Petroleum Engineering Design

4. Heat and Mass Transfer operations in petroleum engineering

 

PG Courses

1. Advanced Drilling Technolgy

2. Advanced Drilling Simulation Lab 

Academics

  • M.Tech. in Petroleum Engineering, Graduated in the year 2013 from Indian Institute of Technology (Indian School of Mines) Dhanbad, INDIA.

  • Ph.D. in Petroleum Engineering on topic "Optimization of Centrifugal Pump Impeller Design for Pumping Viscous Fluids" ,Awarded in the year 2018 from Indian Institute of Technology Madras, INDIA.

 

Position

Departmental Position

1. DAC Secretary

2. DPGC Member

Institute Position

Warden of Diamond Hostel

Awards and Honors

Publications

Books Published

 

List Of Research Publications (only in Peer-reviewed Journals)

List of International publications

  1. Ansari MI, Anwer SF, Siddique M.H., Alam T, Asiri F. Optimization of kinematic parameters of dragonfly wing section in hovering flight. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering. 2026;240(12):1740-1754. doi:10.1177/09544100261437210

  2. Ansari, M.I., Anwer, S.F., Siddique, M.H. and Alam, T., 2024. Optimization of kinematic parameters of dragonfly wing section in forward flapping flight. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, p.09544100241283365.
  3. Kim, B., Siddique, M.H., Bellary, S.A.I., Aljehani, A.S., Choi, Se-woon, Lee, Dong-Eun, 2023, Investigation of a centrifugal pump for energy loss due to clearance thickness while pumping different viscosity oils, Results in Engineering, Vol. 18   doi.org/10.1016/j.rineng.2023.101038
  4. R. Meenakshi Reddy, S. Ravi, Pradeep Kumar Singh, H. Dineshkumar, K. Arun Bhaskar, Vallapureddy Siva Nagi Reddy, A. H. Seikh, M. H. Siddique, Ashok Nagaraj, "Investigation on Heat Deflection and Thermal Conductivity of Basalt Fiber Reinforced Composites Prepared by Hand Layup Method", Advances in Materials Science and Engineering, vol. 2022, Article ID 1294374, 6 pages, 2022. https://doi.org/10.1155/2022/1294374
  5. S. Krishna Mohan, R. Meenakshi Reddy, V. Kamalakar, Pranavan S, M. Amareswar, A. H. Seikh, M. H. Siddique, T. L. Kishore, Bhupender Singh, "Optimization on Tribological Behaviour of AA7075/Zirconium Boride Composites Using Taguchi Technique", Advances in Materials Science and Engineering, vol. 2022, Article ID 4058442, 7 pages, 2022. https://doi.org/10.1155/2022/4058442
  6. R. Meenakshi Reddy, K. Logesh, S. V. Alagarsamy, A. Nagaraj, Rishabh Chaturvedi, Mylavarapu Kalyan Ram, A. H. Seikh, M. H. Siddique, Beruk Hailu, "Parametric Optimization of Abrasive Water Jet Cutting on AA 5083 through Multiobjective Teaching-Learning Method", Advances in Materials Science and Engineering, vol. 2022, Article ID 1123256, 7 pages, 2022. https://doi.org/10.1155/2022/1123256
  7. I. Kathir, Santaji Krishna Shinde, C. Parswajinan, Sudheer Hanumanthakari, K. Loganathan, S. Madhavarao, A. H. Seikh, M. H. Siddique, Manikandan Ganesan, "Flexible Polymer Solar Cells with High Efficiency and Good Mechanical Stability", International Journal of Photoenergy, vol. 2022, Article ID 4931922, 8 pages, 2022. https://doi.org/10.1155/2022/4931922
  8. V. Ravi Raj, R. Krishna Priya, K. V. Bindu, N. Prabhu, S. Madhavarao, G. Ramkumar, A. H. Seikh, M. H. Siddique, Endalkachew Mergia Anbese, "Demonstrating and Investigating the Mechanical Strength of Solar Cells", International Journal of Photoenergy, vol. 2022, Article ID 4713869, 9 pages, 2022. https://doi.org/10.1155/2022/4713869
  9. Doddamani, H., Siddique, M.H., Samad, A., A parato optimal front of fluidic diode for a wave energy harnessing device, Ocean Engineering, 2022, Vol. 260, pp. 1-13https://doi.org/10.1016/j.oceaneng.2022.111821
  10. C. R. Mahesha, R. Suprabha, Mahesh S. Harne, Sachin G. Galme, Sandeep G. Thorat, N. Nagabhooshanam, A. H. Seikh, M. H. Siddique, Mebratu Markos, "Nanotitanium Oxide Particles and Jute-Hemp Fiber Hybrid Composites: Evaluate the Mechanical, Water Absorptions, and Morphological Behaviors", Journal of Nanomaterials, vol. 2022, Article ID 3057293, 7 pages, 2022. https://doi.org/10.1155/2022/3057293
  11. Sathish Thanakodi, Mohanavel Vinayagam, M. Ravichandran, T. Raja, A. H. Seikh, M. H. Siddique, Beruk Hailu, "Reconnoitring Wear Resistance and Mechanical Strengths of AA8111/B4C/ZrO2 Nanocomposite through Taguchi Route", Journal of Nanomaterials, vol. 2022, Article ID 9142336, 10 pages, 2022. https://doi.org/10.1155/2022/9142336
  12. Kim, B., Siddique, M.H., Samad, A., Hu, G. and Lee, D.E., 2022. Optimization of Centrifugal Pump Impeller for Pumping Viscous Fluids Using Direct Design Optimization Technique. Machines, 10(9), p.774.   doi.org/10.3390/machines10090774
  13. Sathish, T., Vinayagam, M., Raja, T., Seikh, A.H., Siddique, M.H., Subbiah, R. and Hailu, B., 2022. Synthesis of AA8050/B4C/TiB2 Hybrid Nanocomposites and Evaluation of Computer-Aided Machining Parameters. Journal of Nanomaterials, 2022. doi.org/10.1155/2022/9745418
  14. Ramalingam, M., Sultanuddin, S.J., Nithya, N., Michael Raj, T.F., Rajesh Kumar, T., Suji Prasad, S.J., Al-Ammar, E.A., Siddique, M.H. and Udayakumar, S., 2022. Light Weight Deep Learning Algorithm for Voice Call Quality of Services (Qos) in Cellular Communication. Computational Intelligence and Neuroscience, 2022. https://doi.org/10.1155/2022/6084044
  15. Logesh, K., Vel, V.M., Seikh, A.H., Hebbale, A.M., AS, R., Nagabhooshanam, N., Subbiah, R., Siddique, M.H. and Kumar, S.P., 2022. Investigations of Nanoparticles (Al2O3-SiO2) Addition on the Mechanical Properties of Blended Matrix Polymer Composite. Journal of Nanomaterials, 2022. doi.org/10.1155/2022/4392371
  16. T. Raja, Mohanavel Vinayagam, Sathish Thanakodi, A. H. Seikh, M. H. Siddique, Ram Subbiah, Atkilt Mulu Gebrekidan, "Mechanical Properties of Banyan Fiber-Reinforced Sawdust Nanofiller Particulate Hybrid Polymer Composite", Journal of Nanomaterials, vol. 2022, Article ID 9475468, 8 pages, 2022. https://doi.org/10.1155/2022/9475468
  17. Jaiswal, A.K., Siddique, M.H., Paul, A.R. and Samad, A., 2022. Surrogate-based design optimization of a centrifugal pump impeller. Engineering Optimization, 54(8), pp.1395-1412.b doi.org/10.1080/0305215X.2021.1932867
  18. Siddula, S., Prashanth, G.K., Nandankar, P., Subbiah, R., Wabaidur, S.M., Al-Ammar, E.A., Siddique, M.H. and Thanappan, S., 2022. Optimal Placement of Hybrid Wind-Solar System Using Deep Learning Model. International Journal of Photoenergy, 2022. doi.org/10.1155/2022/2881603
  19. Ganthia, B.P., Dharmaprakash, R., Choudhary, T., Muni, T.V., Al-Ammar, E.A., Seikh, A.H., Siddique, M.H. and Diriba, A., 2022. Simulation Model of PV System Function in Stand-Alone Mode for Grid Blackout Area. International Journal of Photoenergy, 2022. doi.org/10.1155/2022/6202802
  20. Aravind, K.U., Mekala, N.M., Muthuraju, N.P., Soni, N.B., Al-Ammar, E.A., Seikh, A.H., Siddique, M.H. and Christopher, D., 2022. Thermal Storage for the Analysis of Hybrid Energy Systems Based on Geothermal and Solar Power. International Journal of Photoenergy, 2022. doi.org/10.1155/2022/1296822
  21. Vedanarayanan, V., Srinivasan, J.D., Arulvendhan, K., Kumaran, P.T., Selvakumar, R., Asif, H.S., Siddique, M.H. and Chimdi, J., 2022. Synthesis of Modified Phase-Changing Material with Latent Heat and Thermal Conductivity to Store Solar Energy Using a Carbon Nanotube. International Journal of Photoenergy, 2022. doi.org/10.1155/2022/3412817
  22. Siddique, M.H., Samad, A. and Hossain, S., 2022. Centrifugal pump performance enhancement: Effect of splitter blade and optimization. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 236(2), pp.391-402. 10.1177/095765092110374
  23. I. Kathir, Santaji Krishna Shinde, C. Parswajinan, Sudheer Hanumanthakari, K. Loganathan, S. Madhavarao, A. H. Seikh, M. H. Siddique, Manikandan Ganesan, "Flexible Polymer Solar Cells with High Efficiency and Good Mechanical Stability", International Journal of Photoenergy, vol. 2022, Article ID 4931922, 8 pages, 2022. https://doi.org/10.1155/2022/4931922
  24. Raj Kumar, S. Mohan Kumar, M. E. Shashi Kumar, V. Ravi Kumar, Rajesh Kivade, Jonnalagadda Pavan, A. H. Seikh, M.H. Siddique, Abdi Diriba, "Thermogravimetric Analysis and Mechanical Properties of Pebble Natural Filler-Reinforced Polymer Composites Produced through a Hand Layup Technique", Advances in Materials Science and Engineering, vol. 2022, Article ID 1837741, 8 pages, 2022. https://doi.org/10.1155/2022/1837741
  25. Sathish Thanakodi, Mohanavel Vinayagam, M. Ravichandran, T. Raja, A. H. Seikh, M. H. Siddique, Beruk Hailu, "Reconnoitring Wear Resistance and Mechanical Strengths of AA8111/B4C/ZrO2 Nanocomposite through Taguchi Route", Journal of Nanomaterials, vol. 2022, Article ID 9142336, 10 pages, 2022. https://doi.org/10.1155/2022/9142336
  26. T. Raja, Mohanavel Vinayagam, Sathish Thanakodi, A. H. Seikh, M. H. Siddique, Ram Subbiah, Atkilt Mulu Gebrekidan, "Mechanical Properties of Banyan Fiber-Reinforced Sawdust Nanofiller Particulate Hybrid Polymer Composite", Journal of Nanomaterials, vol. 2022, Article ID 9475468, 8 pages, 2022. https://doi.org/10.1155/2022/9475468
  27. Ansari, M.I., Siddique, M.H., Samad, A. and Anwer, S.F., 2019. On the optimal morphology and performance of a modeled dragonfly airfoil in gliding mode. Physics of Fluids, 31(5), p.051904. doi.org/10.1063/1.5093230
  28. Mrinal, K.R., Siddique, M.H. and Samad, A., 2018. Performance prediction of a centrifugal pump delivering non-Newtonian slurry. Particulate Science and Technology, 36(1), pp.38-45. doi.org/10.1080/02726351.2016.1205690
  29. Siddique, M.H., Afzal, A. and Samad, A., 2018. Design optimization of the centrifugal pumps via low fidelity models. Mathematical Problems in Engineering, 2018. doi.org/10.1155/2018/3987594
  30. Siddique, M., Bellary, S., Samad, A., Kim, J.H. and Choi, Y.S., 2017. Experimental and Numerical Investigation of the Performance of a Centrifugal Pump When Pumping Water and Light Crude Oil. Arabian Journal for Science & Engineering (Springer Science & Business Media BV), 42(11). doi.org/10.1155/2018/3987594
  31. Siddique, M.H., Samad, A. and Husain, A., 2017. Combined effects of viscosity and surface roughness on electric submersible pump performance. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 231(4), pp.303-316. doi.org/10.1177/0957650917702262
  32. Bellary, S.A., Siddique, M.H., Samad, A., Sangwai, J.S. and Chon, B., 2017. Effects of crude oil-water emulsions at various water-cut on the performance of the centrifugal pump. International Journal of Oil, Gas and Coal Technology, 16(1), pp.71-88. doi.org/10.1504/IJOGCT.2017.085998
  33. Bellary, S.A.I., Adhav, R., Siddique, M.H., Chon, B.H., Kenyery, F. and Samad, A., 2016. Application of computational fluid dynamics and surrogate-coupled evolutionary computing to enhance centrifugal-pump performance. Engineering Applications of Computational Fluid Mechanics, 10(1), pp.171-181. doi.org/10.1080/19942060.2015.1128359

Projects & Activities

Sponsored Research Projects (External Funded)

1. (PI), "Development of hybrid drilling techniques for efficient and sustainable critical mineral exploration and mining", 12 months (Till Dec 2026) , Funded by Ministry of Mines, Rs. 10,00,000/- (On going)

2. (Co-PI), " Development of High Performance Drag Reducing Agents for Efficient Pipeline Transport of Heavy Crude Oils", Supported by Royal Castor Products Limited, 12 months (Till Sept 2026), Rs. 14,32,800/-  (On going)

3. (Co-Coordinator) "Margdarshan Scheme Project by AICTE", 36 months (Till April 2027), Rs. 18,00,000/-   (On going)

4. (PI), "Design of Electric Submersible Pump for pumping viscous fluids", 36 months (Till May 2026), Funded by IIT(ISM) Dhanbad, Rs. 15,00,000/-  (Completed)

5. (PI), "Calibration of Vertical Oil Storage Tanks in India", BIS R&D Project, 10 months (Till March 2025), Rs. 3,82,000/-  (Completed)

 

Consultancy Project

1. (PI), "Thorough Study of Well Completion System that Ensures Efficient and Sustainable Dewatering for CBM Development to Reduce Hydrostatic Pressure and Enable Gas Desorption from the Coal Matrix", Funded by GEECL Asansol, WB, INDIA  (Completed)

Membership of Scientific Societies

1. SPE Expert Committe member (Active)

2. BIS MED & PGD Technical Committee member (Active)

Other Academic and Administrative Activities

1. Member of Sanskar Crache, IIT (ISM) (Active).

2. Wellbeing Warden Diamond Hostel (Active).

Guidance

Ph.D. Pursuing

1. Mr. Nitesh Kr Rajak, 22DR0152

2. Mr. Jarrar Ahmed, 24DP0058

3. Mr. Imran Sulthan Nazir, 26DR0261

 

M.Tech (Guided)

1. Rahul 22MT0272 (Working in ONGC Videsh Ltd, New Delhi, INDIA)

2. M Vaibhava Sai, 23MT0433 (Working in SunPetro, Mumbai, INDIA)

3. Kingsley Jahez S, 23MT0183 (Working In MBG Corporate Services, Doha, Qatar)

4. Sumitkumar Patel, 24MT0458 (GTC Oilfields, Ahmedabad, INDIA)

5. Imran Suthan Nazir 24MT0182 (Pursuing Ph.D.)

 

M.Tech (Pursuing)

1. Harshit Agarwalla (Placed in Oil India Limited)

2. Souvik Dolai

3. Nasser Magmly

4. Aditya Lakhera

5. Srijon Narayan Chowdhuri